Suositeltuja lisätarvikkeita

The ramplex copper edition is an alternative to the manifold-proven ramplex. To ensure a safe hold with the increased weight over the Aluminium ramplex cooler and to improve the ease of installation we have integrated the possibility to attach the ramplex to the mounting clips of the RAM module bays. The mount on the ramplex height-adjustable to allow use on may RAM modules and Mainboards. In the rare case that the mount cannot be used the ramplex copper can also be installed and is held by the cooling plates as proven on the standard ramplex cooler.
The cooler is compatible with DDR-, DDR2 and DDR3 modules with or without a heatspreader and can cool up to 3 RAM modules at once. To allow adaption to the different RAM modules the Aluminium cooling plates can be adjusted in distance to allow installation of RAM modules with varying thickness. The cooler is shipped with 4 cooling plates for use on up to two RAM modules, if needed a third kit of cooling plates may be ordered separately. if three RAM modules are intended to be cooled with one ramplex the module bays have to directly neighbouring.
For installation additional thermal compound and pads are required.

Dimensions:
Watercooler with cooling plates, without fittings (WxDxH): approx. 150x25x40mm
Cooling plates (each): approx. 125x20x1mm

Extent of delivery:
Waterblock without fittings, thread size G1/4"
For cooling plates for cooling of up to two RAM modules

Please note: The ramplex is shipped without fittings, please order separately if needed the connection threads are G1/4" in size.