Suositeltuja lisätarvikkeita

The aquatube is a reservoir that is uniquely practical. Its large opening allows easy filling and due to its Plexi cover also perfect flow control. For individual installation of fittings and lighting accessories (not included) the Aquatube features a whopping five G1/4" threads in the base and side. Suitable screw-in plug caps for the unused threads are included. Five M4 threads each on both top and bottom of the Aquatube make installation easy and quick. Optionally installation faceplates made from stainless steel or Aluminum are available. The Aqatube is perfectly sealed and can therefore be installed in any position desired. With this reservoir filling your system is quick and easy and you will also gain another beautifully designed modding piece for your PC:
The Aquatube is machined from a massive piece of brass and therefore extremely rugged.

This version is machined from a massive block of brass and is nickel coated and therefore has an optimal corrosion resistance.

Special features of the G1/4" version:
All connection threads are machined as G1/4", the reservoir has three threads in the bottom and two in the side. Therefore the tubemeter and aquajet are NOT compatible and can only be used with a suitable reducing socket!

Technical Data:
Dimensions: d=79mm l=70mm, V=160 cm³.
Material: Reservoir: Nickel coated brass, Cover: Plexi, Screws: Stainless steel

Extent of delivery:
Reservoir with Plexi cover and seal
3 Screw-in plug caps
10 Stainless steel screws M4

Please note: The reservoir is shipped without fittings, please order the desired fitting separately. The connection threads are G1/4" in size.