Multi-functional 4-channel fan controller with quadruple temperature and speed monitoring as well as power consumption display function.

The controller in futuristic design can be installed in any free 5,25" drive bay. The innovative FSTN display gives the display outstanding readability even at high viewing angles. Up to four fans can be connected and controlled individually to suit the Airflow or noise requirements. To adjust a fan it can simply be chosen with the Mode button and than be set by turning the Jog Wheel on the controller (Control range: 60-6.000rpm in 60rpm steps). The fans are connected to the back of the controller which allows connection of 3.Pin fans on connectors 1-3 and the connection of a 4-Pin PWM fan on connector 4. For monitoring of the current power consumption a so-called CVS unit is also included which is connected between the power outlet and the PSU. The data from the unit is transferred via USB which can be connected through the also included USB slot cover which is connected to the ZM-MFC3 controller. The corresponding value (10-999 Watts) will be displayed graphically and in numbers in the display. The timespan of the current boot-up time is also displayed.

The MFC3 draws power from a 4-Pin Molex connector.

Additionally the controller is equipped with an alarm function which will sound if a fan stalls which warns you to prevent damage to your hardware.

Extent of delivery:
1x Fan controller
4x Connection cable for fans
CVS unit
Mounting screws
Users manual