Swiftech introduces an advanced version of its graphics card waterblock!

This waterblock is made from the best available materials in the watercooling sector: Chrome-plated copper and POM. The metal surface is completely polished to a mirror finish and the combination with the matte black Acetal gives the waterblock an outstanding elegant appearance. The bottom of the waterblock is also polished and all important heat-sensitive components are cooled by the specially adapted surface. The contact surfaces of the cooling plate are already equipped with thermal pads.

This waterblock is fully SLI capable, meaning that the fittings can be connected on both top and bottom of the waterblock.

The cooling channels were designed to permit the best possible heat transfer from the heat-sensitive components of the card. On the most important spot of the cooling plate, the GPU contact surface, the well-known technology of the Swiftech MCW60-R was implemented. This cooling technology is outstanding on the market of GPU-only waterblocks and therefore combines the advantages of both worlds in one waterblock!

The waterblock is shipped with High-flow fittings for 1/2" and 3/8" tubing which are therefore compatible with hoses with an inner diameter of 10mm respectively 19mm. Suitable hose clamps for the fittings are included, the ceramic thermal compound provided is plenty for installation of the waterblock.

Compatibility:
For reference design P891, to be found on the graphics card below the nVidia logo in the second block. For example: XXX-XX891-XXXX-XXX (X are other numbers / letters)

Technical specifications:
Material: Copper, Chrome, POM
Thread size: G1/4"
Dimensions: 198mm (L) x 122mm (W) x 13mm (H)

Extent of delivery:
1x Swiftech Komodo GTX285
2x 3/8" barbed fittings
2x 1/2" barbed fittings
2 pairs of hose clamps
2 Seal caps
1x Ceramic thermal compound
Glued-on thermal pads