|Socket:||Intel 775, Intel 1366, Intel 2011, Intel 1150/1151/1155/1156|
Award winner CPU water block:
The CPU water cooling charts from Hardwaremax (11.10.2012) show a clear result. The Phobya UC1-Extreme (what is the brass version) did jump up to the 1th place, directly followed on 2nd place by the UC-1 LT (the plastic version). The Phobya UC-1 shows a great performance due to the patented back channel technology, which means that above the copper channels there are micro channels which create additional turbulences and therefore dramatically increase the cooling power. In this kit the newest, fluid technically optimized version Phobya UC-2 LT is included.
Experienced giant in even better V2: The G-Changer:
Phobya developed G-Changer radiator from V1 to V1.1 and V1.2 and now to V2 which contains now not only copper fins, but also copper channels. Only the threads for the fittings are made of brass. As a result the cooling power of the radiator is extraordinary increased. This radiator is also very interesting for users that want copper only cooling loops. The 60mm thickness (45mm for the 200mm version) allows high cooling power even with only one fan.
Years of experience with pump technology:
The DC12 pump series convinces the user with a compact measurements and an already included G1/4 inlet and outlet thread. Therefore the fittings can be screwed directly into the pump. The pump can either be screwed on the case bottom (you will have to drill holes into the case then) or be fixed with the self gluing pad and then connected to the power supply with the 3pin cable. The pump differs in the kits depending on the needed pump power (DC12-220 = 2,2m, DC12-260 = 2,6m, DC12-400 = 4m pump power). Even the smallest version is already powerful enough to extend the kit later with 1 or 2 other components like Mainboard coolers or GPU coolers. The DC12-400 is so powerful that you can use even multiple GPU water blocks and cool very big systems. Therefore the Pure Performance Kit is ready to be extended by other water blocks you may need in the future and you must not purchase again another more powerful pump.
The reservoir can be mounted at some free space inside the computer or even outside the computer case. The reservoir makes it easy to fill, to get the air out of the loop, to refill and to monitor the water level even from outside the computer. Inside the reservoir there is an Anti-Cyclone technology used which speeds up the filling process, what is very useful for first time water cooling users.
Turbo-boost with the G-Silent fans:
In the kit there are very good performing fans included which fit best to the radiators. The Phobya G-Silent fans provide a very low noise and efficient cooling down of the water in the radiator. If a kit comes with multiple fans then there is already an y-cable included. The red LEDs of the fans point out another very welcomed modding highlight.
Accessories, tubing and fittings:
The kit is completed by the flexible Masterkleer tubing, which can be cutted to the needed length with the also included tube-cutter. The trendy black-nickel fitting look very good in combination with the black tubing and the transparent water. In the CPU water block there is already thermal paste included, so that in this kit there is really everything you need to install a CPU water cooling kit. Furthermore with the ATX-powerplug you can manually start the power supply to run the water cooling system without running the computer. Further details and hints are given in the printed manual that comes with the kit.
Extend of delivery:
1x Phobya CPU-Cooler UC-2 LT Intel 775,1155,1156,1366,2011 - Black Edition
1x Phobya G-Changer 240 V.2
1x Phobya DC12-220 12Volt Pump
1x Phobya Balancer 150 black nickel
2x Phobya G-Silent 12 1500rpm Red LED ( 120x120x25mm )
1x Fan cable splitter
7x 13/10mm (10x1,5mm) compression fitting G1/4 – black nickel
1x 13/10mm (10x1,5mm) compression fitting 90° revolvable G1/4 – black nickel
1x 2,8m Masterkleer Tubing PVC 13/10mm (3/8"ID) - black
1x Phobya ZuperZero Clear 1000ml
1x Tube cutter
1x ATX Bridging-plug
1x printed manual und Phobya stickers
Dieses Produkt wurde für Sie getestet:
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Click here to see these ratings.
Das Performance Kit kann ich wirklich nur weiter Empfehlen. Es ist ein tolles Produkt. Mein core i5 4670K @4,2GHz lief mit Air Kühlung Thermalright Macho HR 02 Rev. b unter Max Load bei 68 Grad. Mit diesem Kit sind es 48 Grad. Der Einzige Kritik Punkt den ich habe und deshalb nur 4 Sterne gebe ist das man den Radiator nicht befestigen kann, da die mit gelieferten M3 Schrauben sofort durch die Gehäusebohrung rutschen. Hier müssen M3 Unterlegscheiben verwendet werden oder andere Schrauben. Sonst ist das Kit wirklich zu Empfehlen. Pumpe ist überhaupt nicht hörbar. Die Lüfter sind bei 900 Umdrehungen okay, aber sobald die Lüfter bei voller Drehzahl laufen, ist es dann doch sehr laut.