Elegantly and easily connect you external watercooling components to your internal components without having to compromise flow or cooling performance.
The Panama HF38 allows the use of G3/8" inner threads and a features a special inner geometry which sustains the full inner diameter which is usually not possible. This slot cover is extremely flexible and truly upgrades your case and cooling system!
The Panama HF38 consists of three components and can be installed tool-free. Simply fixate the slot cover like and other. The inner part is then connected to the outer part and screwed together. They seal safely with two O-ring seals. Use G3/8" fittings of your choice. The neighboring slots are not obstructed by this slot cover! We recommend using the lowest free slot for easy tubing management.
Should you not be using 3/8" connectors, low-profile adaptor pieces are included to allow use of this slot cover with G1/4" fittings.
Maximum inner diameter: 18mm without congestions!
4x G3/8" inner threads
3-part product made from black POM and zinc-coated steel
Connection thread: 4x G 3/8" inner thread
Adaptor: 4x G 3/8" outer thread to G1/4" inner thread
An Englisch mounting manual can be found here:
Extent of delivery:
Blister- Retail- packaging, mounting material
4x G3/8" to G1/4" adaptor
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Number of slots:||1|
|Function:||G3/8" - G3/8"|
Napsauta tätä, jos haluat näyttää tämän kysymyksen.
Click here to see these ratings.
TOP! Habe ich verbaut und super Lösung. Damit endlich eine gute Durchführung ohne Bremse.
Einziger Vorschlag. Dreht Gewinde und Schrauben, damit man das von außen festschrauben kann. So muss man im Case Schrauben.
Aber kein Problem, weil wenn 1y drin drin.