- Article no.: 1011292
- Manufacturer no.: 17272
- EAN: 4250197172721
- Weight: 0,254 kg
> 50 valmiina lähetettäväksi, toimitusaika 1-3 päivää
Hintoja sis. arvonlisävero plus toimituskulut
With the new D-RAM coolers all desired memory chips can be cooled.
This cooling block is screwed onto the optional cooling modules or existing heatspreader with a hole spacing of 110mm (like the Corsair Dominator).
Due to its black nickel ground and black or transparent cover with lighting capabilities is the RAM cooler adaptable for each individual system . It is (availaible in/distinguished by) three different sizes: 2, 4 or 6 RAM modules which can be cooled parallel.
Due to its special technology, the RAM cooler can be used in both, high-flow systems as well as in lower flow systems, at the optimal level.
Material: Copper (black nickel)
Colour: plexi (transparent)
Connection thread: 2x 1/4"
Dimensions (LxWxH): 128 x 45,2 x 11,1mm
RAM modules: 1 - 4
Scope of delivery:
1x D-RAM cooler X4 Universal
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Material top cover:||Plexi|
|Material cooling plate:||Copper Black Nickel|
|Dimensions (L x B x H):||45,25 x 127,55 x 16,2mm|
Napsauta tätä, jos haluat näyttää tämän kysymyksen.